How to Replace a Saab 9-3 Key
The Saab 9-3 is a car that has a large attraction for drivers. It is powerful and has excellent visibility. It has a very high safety rating.
However, it is crucial to ensure that you have at the very least two keys that work for your car. If you lose just one key, it could be costly to purchase a new one.
How to Replace the Ignition Key in a Saab9-3
If the car key won't turn in the ignition it is time to replace it. This guide will walk you through how to do it on the Saab 9-3. You will need a replacement key as well as a reprogrammable battery and a new key-fob case.
Modern Saab models employ a transponder instead of a traditional key to unlock the car and then start it. The problem with this is that the reprogrammable batteries in the key-fob will eventually wear out and will not hold a charge for long. This is especially applicable if you are using the same key for the lock you have.
The good part is that the battery can be replaced easily by a professional locksmith. If you have the proper tools and patience, you can do it yourself. The first step is to take the key-fob from its case. Insert a flathead into the slot that is in the middle of your case. The plastic is thin and is easily damaged.
When the case is opened, you can prepare the new key by combining the lower portion of the old key and the banana and transponder on the new key. This will ensure that the new key is connected to the CIM properly, which could be the difference in replacing the primary key for your Saab 9-3.
How do I replace the ignition Key on the Saab 900
If you don't have two keys, you'll need to remove the dashboard and steering wheel in order to access the ignition. Begin by disconnecting the negative battery cable. Once the battery is disconnected, it is possible to remove all the trim pieces as well as dashboard pieces that surround the steering wheel. Once the dash is removed, you can insert a screwdriver into the hole at the back of the ignition switch and remove it.
The ignition cylinder is fitted with a key lock which could stop the vehicle from starting if it does not have the key in it. If the ignition switch on your 900 isn't working properly, check to see if the key is in the lock or stuck in the barrel of ignition. It's also recommended to rotate your keys frequently and keep them clean so that they don't get bent.
Saab cars are different from other cars in that they don't make use of traditional keys made of metal. Instead, the car recognizes the electronic signals from the key fob by a specific chip inside it.
If you have lost your only working key fob the dealer will charge you the highest dollar to replace your computer module (known as the CIM). We can reprogram the EEPROM of your existing computer and enable it to accept new keys, without the need to replace it. You'll save up to 50% off the dealer's price! This is the SAAB Key PROGRAM. Find out more about it here!
How do you replace the ignition Key in the Saab9-5
The metal portion of a traditional Saab key is easy to copy, and is also not much of a deterrent against theft of vehicles. lost saab key of the key fob has an electronic chip that detects the car when the key is inserted into the ignition switch.
Saab's anti-theft system has relied upon this technology for more than a decade. It's not as effective as a physical lock on the door, but it does make the act of stealing your car more difficult. Every Saab owner must keep an extra Saab key in their vehicle.
The majority of new Saabs come with two keys, however they can be added at the dealer's expense using a handheld device known as Tech-2. Tech-2. The cost can be under $400 for the transmitter+transponder (different than the metal key blade/shell that opens the doors and turns the ignition cylinder). The only exception to this is NG 9-3 cars, which have modernized, more modern features that require a separate key-fob and utilize a different process.
The dealer will replace the CIM or TWICE module in these cars if the keys are lost, and charge you a premium for doing it. But we can reprogram the EEPROM on your computer and set it up to accept new keys without replacing the expensive modules.
How do I replace the ignition Key in a Saab XC90
If your SAAB 9-3 key fob begins having issues turning the barrel of the lock it's possible that it's time to replace it. The process is simple and you don't need to go to a dealership. You can do it at home, using a couple of basic tools.
First, you'll need prepare the new key. Before you begin, turn off the anti-theft feature by placing blocks underneath your rear wheels, and then releasing your handbrake. Insert the key in the ignition, and then turn it to the "on" position. This will activate the accessories however, it won't start the engine. Repeat this process five times, then leave the key in the on position.
Next, you'll need to purchase a new case for your old key fob. These are available at most auto parts stores and are generally very affordable. You can purchase them without electronics based on the model.
To open the case, place a flathead screwdriver inside the slot that is in the middle, and gently work it. After you have split the case, you'll have access to all of the internal electronics. To get rid of the electronics, use a small screwdriver and attempt to pull them out in a gentle manner.